Receiver Mounted Air Compressors

Receiver Mounted Air Compressors: Standard Features

  • Air outlet, all models 1/2"bspf
  • Heavy gauge reinforced steel mounting baseplates and beltguard
  • Tough durable powder coated finish
  • Double welded British air receivers to BS EN286
  • Vehicle battery receives charge during compressor operation
  • Unique belt tensioning system
  • Belt tension/condition inspection cover. Brass fully automatic load/un-load governor control
  • Brass safety relief valve
  • High quality fluid filled pressure gauge for accuracy and reliability

Not for outdoor use: in vehicle installation only.

Dimensions do not include: Outlet valve or manifold, anti vibration mountings or any allowance for filling fuel tank. A 100mm clearance is required to allow for proper ventilation/cooling and beltguard removal for routine servicing.

P80 - 8hp OHV Petrol

Typical Applications
  • Car and light commercial tyre fitting
  • Mobile vehicle servicing
Dimensions
  • Length 1350mm
  • Width 400mm
  • Height 1050mm
  • Weight 130kgs

Build up time

  • 0-150psi = 4 mins 30 secs

Technical Specifications

  • 18cfm displacement. 2 cylinder, single stage belt driven pump
  • Mounted on 150ltr British Air Receiver, double welded to BS EN286
  • Max pressure 150psi
  • Honda GX240 8hp OHV petrol engine with electric and re-coil start, low oil level protection switch
  • Battery charge coil​

P11 - 11hp Petrol

Typical Applications
  • Commercial/Agricultural tyre fitting
  • Commercial/Agricultural vehicle servicing/Plant repair
Dimensions
  • Length 1400mm
  • Width 470mm
  • Height 1130mm
  • Weight 180kgs

Build up time

  • 0-150psi = 2 mins 35 secs

Technical Specifications

  • 30cfm displacement. 2 cylinder, 2-stage belt driven pump
  • Mounted on 200ltr British Air Receiver, double welded to BS EN286
  • Max pressure 175psi
  • Honda GX340 11hp petrol engine with electric and re-coil start, low oil level protection switch
  • Battery charge coil​

YD10 - 10hp Diesel

Typical Applications
  • Commercial/agricultural/earthmover tyre fitting
  • Heavy plant repair
Dimensions
  • Length 1400mm
  • Width 510mm
  • Height 1100mm
  • Weight 194kgs

Build up time

  • 0-150psi = 2 mins 45 secs

Technical Specifications

  • 30cfm displacement. 2 cylinder, 2-stage belt driven pump
  • Mounted on 200ltr British Air Receiver, double welded to BS EN286
  • Max pressure 175psi
  • Yanmar L100 10hp diesel engine with electric and re-coil start
  • Battery charge coil​